Search for "shroud gland"CMP B350 ZEN insulated brass cable gland with M25S male thread. The insulated gland is suitable for both outdoor and indoor environments and suitable for use on all types of screened steel wire armoured cable (SWA) and screened telecommunication cables.
Cable diameters:
Cable gland supplied with:
B350 cable gland
Brass locknut
LSF gland shrouds are available but should be ordered separately if required.
CMP E1W LSF brass gland kit with M25S male thread. The E1W glands are suitable for use on LSF sheathed SWA cables. Providing IP66 seals on the outer and inner cable sheaths and three part armour wire termination.
Cable diameters:
Outside diameter Min: 14.0mm
Outside diameter Max: 22.0mm
Inside diameter Min: 11.1mm
Inside diameter Max: 19.9mm
Cable gland kit contents:
E1W brass cable gland
Brass locknut
Earthtag
Nylon thread washer
LSF shroud
CSGK 3 “Top Hat” gland kit is designed to be used with single-core (1core) AWA cables. The kit includes a set of three tubular glands with M10 four-bolt fixings to BS2562 dimension X: 66.0 x 66.0mm fixing centres.
Manufactured from aluminium alloy and suitable for use with AWA cables up to 36kV, the cable armour wires are effectively earthed around the circumference of the gland.
Supplied as a set of three phases with ColdShrink EPDM shrouds to provide a barrier to moisture ingress.
CSGK3 properties:
Suitable for a range of conductor cross-sectional areas, depending on the cable’s maximum voltage rating. Smaller cable diameters can be accommodated by using additional ColdShrink build-up kits. Please contact our MV Sales Team for advice.
ColdShrink glands (top hat glands) are manufactured from tubular galvanised mild steel (CSGK 1 and CSGK 2) or aluminium sheet (CSGK 3), with ColdShrink EPDM shroud and worm drive connection to the cable armour wires. Providing an effective moisture seal around the cable sheath and earths the cable armour wires.
Gland fixing kits are made to match the stud spacing specified in BS 2562.
CSGK 1 and CSGK 2 gland kit are suitable for three-core SWA cables up to 36kV, supplied with integral earthing facility.
Aluminium Cold Shrink glands (CSGK 3) are suitable for single-core AWA cables up to 36kV – supplied in sets of three phases.
CSGK 2 “Top Hat” gland kit, or steel tubular glands, are manufactured from galvanised sheet steel and suitable for use with all SWA cables up to 36kV.
The cable armour wires are effectively earthed around the circumference of the gland, with an integral earth facility provided on the mounting flange to allow connection to the building system earth.
CSGK 2 glands are suitable for three-core MV power cables and supplied with a ColdShrink EPDM shroud to provide a barrier to moisture ingress.
Supplied with M12 fixings and BS2562 Y fixing centres: 86.0 x 95.0mm. Each ColdShrink gland kit is suitable for a range of conductor cross-sectional areas, depending on the cable’s maximum voltage rating. Please see our datasheet for full gland kit specification.
CSGK 2 gland kit properties:
CSGK 1 “Top Hat” gland kit, or steel tubular glands, are manufactured from galvanised sheet steel and suitable for use with all SWA cables up to 36kV.
The cable armour wires are effectively earthed around the circumference of the gland, with an integral earth facility provided on the mounting flange to allow connection to the building system earth.
CSGK 1 glands are suitable for three-core MV power cables and supplied with a ColdShrink EPDM shroud to provide a barrier to moisture ingress.
Supplied with M10 fixings but features both X and Y BS2562 fixing centres, 66.0 x 66.0mm and 86.0 x 95.0mm. Each Cold Shrink gland kit is suitable for a range of conductor cross-sectional areas, depending on the cable’s maximum voltage rating. Please see our datasheet for full gland kit specification.
CSGK 1 gland kit properties:
Copyright 2025 ETS Cable Components. All rights reserved. Website by Tiga Creative Marketing Kent.
