Search for "earthing gland"CMP insulated earth brass ZEN cable gland with M25S male thread. Suitable for internal and external applications with all screened steel wire armoured (SWA) cables. The gland provides insulation between the gland and armour from the equipment. B327 ZEN glands feature a cast integral earth lug.
Cable diameters:
Outside diameter Min: 14.0mm
Outside diameter Max: 22.0mm
Inside diameter Max: 20mm
Cable gland kit includes:M25S thread B327 Insulated CIEL cable gland and brass locknut.
CMP E1W LSF brass gland kit with M25S male thread. The E1W glands are suitable for use on LSF sheathed SWA cables. Providing IP66 seals on the outer and inner cable sheaths and three part armour wire termination.
Cable diameters:
Outside diameter Min: 14.0mm
Outside diameter Max: 22.0mm
Inside diameter Min: 11.1mm
Inside diameter Max: 19.9mm
Cable gland kit contents:
E1W brass cable gland
Brass locknut
Earthtag
Nylon thread washer
LSF shroud
ColdShrink glands (top hat glands) are manufactured from tubular galvanised mild steel (CSGK 1 and CSGK 2) or aluminium sheet (CSGK 3), with ColdShrink EPDM shroud and worm drive connection to the cable armour wires. Providing an effective moisture seal around the cable sheath and earths the cable armour wires.
Gland fixing kits are made to match the stud spacing specified in BS 2562.
CSGK 1 and CSGK 2 gland kit are suitable for three-core SWA cables up to 36kV, supplied with integral earthing facility.
Aluminium Cold Shrink glands (CSGK 3) are suitable for single-core AWA cables up to 36kV – supplied in sets of three phases.
TE Connectivity heat shrink gland or “Top Hat” gland kits are manufactured from either galvanised mild steel (1605, 1606 & 1607) or aluminium sheet (1608), with heat-shrinkable outer shroud and worm drive connection to the cable armour wires.
These tubular TE Connectivity glands provide an effective moisture seal around the cable sheath and earth the cable armour wires. The gland fixings are made to match the stud spacings of specified in BS2562.
EAKT 1605, 1606 & 1607: suitable for three-core (3core) SWA cables up to 36kV. Supplied with integral earthing facility.
EAKT 1608: suitable for single-core AWA cables up to 36kV.
Nexans remote armour earth kit, designed for terminating armour wires (SWA and AWA) in instances where glands are not desired, e.g. when installing armoured cables onto Over-Head Line (pole mounting) terminations.
Each armour earthing kit contains an aluminium under armour support ring, stainless steel worm drive clip, mastic tape, tinned copper braid and heat shrink tubing for environmental protection.
RAE5 Nexans remote armour earthing kit, designed for terminating armour wires (SWA and AWA) in instances where using gland kits is not desired. For example, when installing cables with outdoor (pole mounting) terminations.
Each RAE5 armour earth kit includes: aluminium under armour support ring, stainless steel worm drive clip, mastic tape, tinned copper braid and heat shrink tubing for environmental protection.
Designed to suit cables with an outside diameter between 55mm – 61mm.
Copyright 2025 ETS Cable Components. All rights reserved. Website by Tiga Creative Marketing Kent.
